HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber
Specifications
Details
HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber
This Programmable rubber plastic Rain Test Chamber is used to simulating the lighting, auto parts, household appliances and other products in condition of moisture or rain , to see the influence of water to the products. Through this can test the resistance to the rain penetration and moisture proof ability of products.
Standards:
IEC60529 , ISO 20653 , GB2423.38 - 90 , GB5170.20 -90 , GB 4208-93, IPX4 waterproof test methods.
Specifications:
|
Swing pipe radius |
R400mm |
|
Test chamber size(L*D*H) |
900*900*900mm |
|
External size(L*D*H) |
1350*1120*1770mm |
|
Spray hole size |
Diameter:0.4mm |
|
Swing pipe internal diameter |
15mm |
|
Sample turntable diameter |
Diameter:400mm |
|
Flow |
1.1L/min±5% (IPX3) ; 1.8L/min±5% (IPX4) |
|
Turntable bearing |
50kg |
|
Turntable height range |
350-600mm |
|
Turntable rotation speed |
1-5r/min(precise and adjustable) |
|
Turntable rotation mode |
Always forward / reverse alternating |
|
Swing tube angle |
120º(IPX3),350º(IPX4)Or custom settings |
|
Power |
AC220V±10% ；50Hz, 1KW |
|
Water source conditions |
1. The user is required to configure water source for the equipment at the installation site, with the water pressure not less than 0.2MPa, and install 4-point faucet. 2. The faucet shall not be more than 2m away from the equipment |
Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam
View more about HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber on main site