HannYa Programmable Thermal Shock Test Chamber High Low Temperature Shock Test Machine

Thermal shock machine can be used to test the structure of the material or composite material, in an instant by a very high temperature and low temperature continuous environment can bear degree of to in the shortest time test its due to thermal expansion and contraction caused by the changes of chemical or physical damage. Applicable objects including metal, plastic, rubber, electronics and other materials, to improve their products as the basis or reference.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.

Standards:

1. GB/T2423.1-1989
2. GB/T2423.2-1989
3. GB/T2423.22-1989
4. GJB150.5-86
5. GJB360.7-87
6. GJB367.2-87 405
7. SJ/T10187-91Y73
8. SJ/T10186-91Y73
9. IEC68-2-14
10. GB/T 2424.13-2002
11. GB/T 2423.22-2002
12. QC/T17-92
13. EIA 364-32

Product Descriptions

Imported compressor

The french import taikang compressor adopts the french taikang full-enclosed compressor, which is energy- saving, silent and high-efficient

Imported touch screen controller

Programming with original import controller, clear digital, flexible touch, larga capacity SD recording, powerful function.

Unique Apertune Pin Hole

Meet the test sample power, LED, power supply, digital industry preferred test chamber

Closed design of condenser

The condenser is surrounded by a closed design and the heat dissipation performance is very good

Schematic Diagram of Working Principle

The high and low temperature thermal shock test chamber is a necessary test equipment in the material industry such as metal, plastic, rubber, electronic, etc and used for testing the material structure of composite material.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time. It is divided into two-zone type and three-zone type and the different and product conforms to the requirements of GB/T2423.1-2008 Test A, GB/T2423.2-2008 Test B, GB-T10592-2008,GJB150.3-198, GJB360A-96 method 107 temperature impact test.

Specification

Inner Size(mm)	400×350×300	400×500×400	500×600×500	500×750×600
Temperature Range	High temperature chamber:RT~+150°C Low temperature:RT~-60°C
Temperature Deviation	Less than ±2°C
Temperature Conversion Time	Less than 10S
Temperature Recovery Time	Less than 5min
Material	External material: SUS#304 Stainless steel plate Internal material:SUS#304 Stainless steel plate
Coolting System	Water-cooled or air-cooled, Tecumseh compressor in France, Environment friendly refrigerant
Controllor	Programmable temperature controllor
Temperature Sensor	PT 100 *3
Setting Range	TEMPERATURE : -100.00+200.00°C / TIME : OH1M ~ 9999H 59M / CYCLE ~ 10000 CYCLE
Resolution	TEMPERATURE : 0.01°C / TIME : 1 MIN
Output Mode	PID + PWM + SSR CONTROL METHOD
Simulated Load IC (KG)	3.5kg
Standard Accessories	Cable hole, lighting equipment
Cooling System	Water-cooled/air-filled type
Power	AC380V/50HZ Three-phase four-wire ac power
Additional Features	The outlet and return it checks for taste known control /CM BUS (RS-485) remote monitoring management system /Ln2 liquid nitrogen rapid cooling control device
Remarks	It can be customiazed according to customer demands. Technology index refer to product description.Delivery time within 45days.

Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

View more about HannYa Programmable Thermal Shock Test Chamber High Low Temperature Shock Test Machine on main site